Turbax Conversion Kit w/ HK4035-800

164,07 €

Impuestos incluidos

Cantidad:

Size Chart

Measuring Tips to Assure The Best Fit

Measure your back size â€“ wrap the measuring tape snugly around your ribcage, just under your bust line 1, keeping it horizontal. This will give you your band size.
Then measure around the fullest part of your bust 2 , again keeping the tape horizontal.
To determine the size of pants, measure the girth of the waist 3 and hips 4
The following charts will help you match the designerâ€™s size scheme for this product (indicated in the dropdown) to your usual size

size guide visible to all products

	UK	USA	EU	BUST	Waist	Hips
XS	8	4	34	31/32	23/24	33/34
S	10	6	36	33/34	25/26	35/36
M	12	8	38	35/36	27/28	37/38
L	12	8	38	35/36	27/28	37/38
XL	10	6	36	33/34	25/26	35/36

Electric powered ducted fan models are becoming very common now, and for many years, the Turbax Fan has been a very popular model for powering a variety of jet kits. Due to the fact that there are many models already built that contain Turbax fans, as well as many other models that can use this power system, Scorpion has developed an Electric Conversion Kit for this fan unit. The new Turbax Electric Conversion Kit consists of a custom version of the Scorpion HK-4035-800 motor, connected to a CNC machined aluminum Motor Mount and Stator Vane support. This assembly is designed to be a direct bolt in replacement for the stock glow engine motor mount, and allows for easy conversion of either new or existing power systems from Glow to Electric power.

The special version of the HK-4035-800 motor includes an extended 8mm motor shaft that is precision ground to a 5mm diameter at the end, to mate up with the stock Turbax Fan Impeller. The CNC machined Stator Vane Support has 6 pockets around the perimeter with threaded holes to allow the stock stator vanes to be bolted in place with no modifications. Once installed, this powerful Electric Conversion Kit can provide up to double the thrust, compared to the stock glow set-up with a .46 size engine, and can breathe new life into existing models that were a bit underpowered with the stock glow motor power systems.

With the stock 5-blade Turbax impeller fan, the Scorpion Electric Conversion Kit can be run on either 10 or 12 Li-Po cells, depending on the desired power output level. Running on 10 Li-Po cells, 35 volts under load, the motor will pull 75 amps for 2625 watts of power, and will produce 4200 grams of thrust (9.3 pounds) at approximately 25,500 RPM. Running on 12 Li-Po cells, 42 volts under load, the motor will pull 105 amps for 4410 watts of power, and will produce 5900 grams of thrust (13.0 pounds) at approximately 30,000 RPM.

If you have a new model that you want to try an electric ducted fan power system in, or if you have an older model with a Turbax glow powered fan in it that you would like to convert to electric power, this new Scorpion conversion kit is exactly what you need!

Specifications

Stator Diameter	40 mm (1.56 in)
Stator Thickness	35 mm (1.024 in)
No. of Stator Arms	12
Magnet Poles	8
Motor Wind	6 Turn Delta
Motor Wire	27 - Strand 0.29mm
Motor Kv	800KV RPM / Volt
No-Load Current (IO)	2.5 Amps @ 8.4v
Motor Resistance (RM)	0.010 Ohms
Max Continuous Current	100 Amps
Max Continuous Power	4200 Watts
Weight	574 Grams (20.25 oz)
Outside Diameter	48.9 mm (1.9 in)
Shaft Diameter	4.98 mm (0.196 in)
Body Length	61.5 mm (2.38 in)
Overall Shaft Length	118 mm (4.65 in)
Max Lipo Cell	12s
Motor Timing	5deg
Drive Frequency	8kHz