.
.
F16 1.8m (71.3″) 1/8 con tren retractil
Measuring Tips to Assure The Best Fit
- Measure your back size – wrap the measuring tape snugly around your ribcage, just under your bust line 1, keeping it horizontal. This will give you your band size.
- Then measure around the fullest part of your bust 2 , again keeping the tape horizontal.
- To determine the size of pants, measure the girth of the waist 3 and hips 4
- The following charts will help you match the designer’s size scheme for this product (indicated in the dropdown) to your usual size
size guide visible to all products
UK | USA | EU | BUST | Waist | Hips | |
---|---|---|---|---|---|---|
XS | 8 | 4 | 34 | 31/32 | 23/24 | 33/34 |
S | 10 | 6 | 36 | 33/34 | 25/26 | 35/36 |
M | 12 | 8 | 38 | 35/36 | 27/28 | 37/38 |
L | 12 | 8 | 38 | 35/36 | 27/28 | 37/38 |
XL | 10 | 6 | 36 | 33/34 | 25/26 | 35/36 |
Pilot-RC se complace en anunciar la producción de uno de los aviones más épicos de la aviación, el General Dynamics F16 Fighting Falcon.
Queríamos que este fuera más allá como un hermoso modelo a escala. Encontramos formas de hacerlo lo suficientemente confiable y resistente como para volar de manera regular, y no ser un problema para transportar o armar, todo en un paquete que vuela brillantemente bien.
Esta versión a escala 1/8 ha sido diseñada con un área alar mejorada, para brindar mejores prestaciones y características de vuelo.
Modelo: 1/8 F16
Envergadura: 52.9″ (1,344mm)
Longitud: 71.3″ (1.81mm) – Plus pitot tube
Área del ala:
Peso: 17.8lbs (7.85kg)
Construcción en composite completa, ligera y resistente.
Equipo necesario:
Turbine: 60-100N
Servos: x9
5x middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder
4x middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
BASIC SETUP:
Control throws:
Aileron: 10mm up / 10mm down – 40% Expo
Measured from the wingtip
Rudder: 35mm left / 35mm right – 50% Expo
Elevator: 40mm up / 40mm down – 45% Expo
Measured from the front of the leading edge of the elevator.
The CG is 148mm from the front leading edge on the root of the wing
Elevator center position:
Center of the leading edge of the elevator should be 10mm above the bottom surface of the fuselage