.
.
Predator 2.2m (90″) con tren retractil
Measuring Tips to Assure The Best Fit
- Measure your back size – wrap the measuring tape snugly around your ribcage, just under your bust line 1, keeping it horizontal. This will give you your band size.
- Then measure around the fullest part of your bust 2 , again keeping the tape horizontal.
- To determine the size of pants, measure the girth of the waist 3 and hips 4
- The following charts will help you match the designer’s size scheme for this product (indicated in the dropdown) to your usual size
size guide visible to all products
UK | USA | EU | BUST | Waist | Hips | |
---|---|---|---|---|---|---|
XS | 8 | 4 | 34 | 31/32 | 23/24 | 33/34 |
S | 10 | 6 | 36 | 33/34 | 25/26 | 35/36 |
M | 12 | 8 | 38 | 35/36 | 27/28 | 37/38 |
L | 12 | 8 | 38 | 35/36 | 27/28 | 37/38 |
XL | 10 | 6 | 36 | 33/34 | 25/26 | 35/36 |
Debido a su volumen este modelo tendrá unos gastos de envio de 60€ y será enviado por CBL (2 o 3dias)
Tambien estaria disponible la opcion de recogerlo en tienda, no tendria gastos de envio.
Especificationes:
Modelo: | Predator 2.2 |
Envergadura: | 80.8″ (2,000mm) |
Longitud: | 90″ (2,280mm) |
Área del ala: | 1,292 “² (8,332 cm²) |
Peso: | 23.7lbs (10.8kg) |
CARACTERISTICAS:
- Construcción en composite completa, ligera y resistente.
- ala de dos piezas y estabilizador de dos piezas para facilitar el transporte
- Pintado fuera del molde por lo que no hay líneas de costura.
- Tubos preinstalados para cables de extensión servo
- Posibilidad de motar tobera vectorial opcional.
Incluye:
- Avion (con bayonetas de aluminio y control horns de fibra)
- Tren retractil electrico con frenos Pilot-RC
- Cables extensiones de servo
- Tail pipe doble pared (105mm diameter – for 80-300N turbines)
- Deposito de combustible 3000ml + 240ml UAT
- Varillas con rotulas Pre-preparadas
Version TR, que incluye lo de arriba, más x8 servos Pilot-RC, cables de extensión de servo todos preinstalados y bolsa para alas.
Opcional: Funda de fuselage
Opcional: Bolsa de transporte para alas
Opcional: Tobera vectorial
Equipo necesario:
Turbine size:
- 80-160N for normal sport flying
- 180-260N for 3D vector flight – Avoid high speed high G flying
Servos: 8 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering
Tambien es necesario otros componentes, como emisora, receptor, bateries, etc
Build info:
Aileron: 17mm, Rudder: 25mm, Elevator: 13mm.
Flap: 46mm for take off and 78mm for landing.
The CG is 275-283mm from the front leading edge on the root of the wing
Decoraciones disponible para pedir:
Colour scheme 17:
Colour scheme 18:
Colour scheme 19:
Colour scheme 20:
Colour scheme 21:
Colour scheme 22:
Colour scheme 23:
Colour scheme 24:
Colour scheme 25:
Colour scheme 26:
Colour scheme 27:
Colour scheme 10
Colour scheme 11
Colour scheme 12
Colour scheme 13
Colour scheme 14
Colour scheme 15